Terra Bella

One Sided Reducer- Transition to carpeted areas. More common uses against solid objects such as sliding doors or other areas where common quarter round would not look proper. Vertical height flush reducer from material to other floor coverings such as vinyl. NOT FOR FLOATING FLOORS

Overlap Reducer- Used when transitioning from hardwood to lower vertical floor heights such as vinyl or carpet.

Baby Threshold/End Cap- Also used at sliding door areas. This is the most versatile trim piece we've found that can be adapted with the use of a table saw for floor coverings that have a slight vertical height difference. 

T Molding- Used to transition one floor covering to another. Typically ceramic tile with the same vertical height.

Quarter-Round Molding- Installed after the floor against existing baseboard to allow proper expansion space.

Flush Stair Nosing- A molding for use as a stair landings trim, elevated floor perimeters, and stair steps.

Overlap Stair Nosing- A molding for use as a stair landings trim, elevated floor perimeters, and stair steps.

Standard 3 in 1 Underlayment- Basic underlayment used for  floating floors.

Sound Solution Vapor Block Underlayment- Upgraded underlayment reduces sound transmission, provides moisture barrier.                More information

PVAC Glue- For floating glue together floors.

6 mm Cork Underlayment- Used in areas where sound control is required.

Armstrong Pro Connect Adhesive- Used for direct glue down of hardwood to concrete.

Bostiks Best Urethane Adhesive- Used for direct glue down of hardwood to concrete.

Bostiks MVP4- (Moisture vapor protection) Used when concrete moisture levels are questionable or unacceptable.